More videos …

Posted at 6:11 pm | Filed Under: Uncategorized

Here are links to some short videos of customer units we have recently repaired, by no means an exhaustive list, will continue to add more videos… We can get or make billet impellers for ANY centrifugal supercharger you may need repaired. Old or New ! We actually show proof of the vast variety that we […]

Read More>

Videos of Supercharger Rebuilds

Posted at 8:19 am | Filed Under: News

Here are links to some short videos of customer units we have recently repaired, by no means an exhaustive list, will continue to add more videos… Paxton NOVI 1500 SL upgraded with Vortech Ti Trim – https://youtu.be/AW2EVh-JqPU Paxton NOVI 2500 billet – https://youtu.be/5Qi88Z7gGxU Paxton NOVI 1000 – https://youtu.be/F13GETcMwTg Rotrex C30-94 – https://youtu.be/bOVNK3myN7Q P600B w/D1SC – https://youtu.be/53Pirium654 […]

Read More>

New billet impellers for Vortech Ti trim and Paxton NOVI 2200 superchargers

Posted at 11:48 am | Filed Under: News

New lightened replacement billet impellers, with 8 tall / 8 short fins, will be available for Ti, T, Si, S, SCi, and SC trim Paxton NOVI 2200, 1500, 1200, and 1220. Center Hub and fins have been thinned to reduce weight and improve flow.

Read More>

New billet impellers for F1, F1C, F1D, F1R, F1X, F2, etc

Posted at 7:35 pm | Filed Under: News

New 7075 billet impellers for F1, F1C, F1D, F1R, F1X, F2, and many more!

Read More>

Billet Impeller for V7 YSi, YS, or Y trims, 7075-T6

Posted at 10:53 am | Filed Under: News

NEW high end billet impeller, available for V7 YSi, YS, or Y trims, plus many more! Made from 7075 T6 aluminum alloy. Contact with any questions! VORTECH V1, V2, V3, V4, V5, V7, V9, V24, V28

Read More>

F1 / F2 / M3 mid-range billet

Posted at 12:31 pm | Filed Under: News

New mid-range billet, available for F1 / F2 / M3 … made from high strength 6061 T6 aluminum alloy … https://www.superchargerrebuild.com/other-centrifugal-c2-p1sc-p600b-d1-etc/

Read More>

Revised blade machining improves flow

Posted at 5:31 pm | Filed Under: News

Revised blade machining improves flow on stock 10 tall / 10 short blade, Powerdyne BD-series … all castings made from high quality, high strength C355 silicon aluminum alloy … https://www.superchargerrebuild.com/powerdyne/

Read More>

7075-T6 Billet impellers available for many models

Posted at 9:20 pm | Filed Under: News

Aftermarket replacement aluminum billet impellers, made from aerospace quality 7075 T6 aluminum alloy, are now available for many supercharger models such as: Vortech V1, V2, V3, S, Si trim, T, Ti trim, V4, V5, V9, G-trim, F-trim, NOVI 1000, 1200, 1500, 2000, 2200, 2500, D1SC, P1SC, P1SC-1, P600B, and XB-1A, XB-1R, BD-11A, BD-11R, BD-11, BD-10, […]

Read More>

Site Navigation

Categories

Archives

Recent Auctions

Quick Links